Portable X-ray System
XR150
The XR150 X-ray generator is a 150kV, battery powered, pulsed X-ray generator used primarily for security applications. The XR150 weighs just over 2 kgs yet is capable of penetrating over 15 mm steel, making it ideal for use in remote locations or for light scale security and defence operations.
Key Features
- Program countdown delay timing (5-240 seconds)
- Variable pulse rate – up to 1 pulse per second
- Set multiple pulse trains
- Select time delay between pulse trains
- Recording of total lifetime pulses
- Resettable pulse trackers
- Battery charge indicator
- Dial Key
- Removeable handle
- Five pin cable connectors
- Weather resistant touch pad
- Variable pulse selection memory
- Custom Battery charger/conditioner/tester
- Remote firing cable
XR200
The XR200 is a 150 kV, battery powered, pulsed X-ray generator used in security and light industrial applications. The unit is compatible with both DR and CR X-ray detector plates.
With DR systems the generator can be controlled and fired through Scan View or XTK x-ray imaging software. With CR systems the unit is controlled manually. Our Scansilc x-ray systems can also be used with the generator in both syncronised remote and manual (AED) modes.
Key Features
- Pulse setting up to 999 pulses
- Variable pulse rate – up to 1 pulse per second
- Set multiple pulse trains
- Select time delay between pulse trains
- Recording of total lifetime pulses
- Resettable pulse trackers
- 6000 pulses per battery charge
- Battery charge indicator
XRS-3 Heavy Duty
The XRS3 is a 270 kV, battery powered, pulsed X-ray generator used in security and light industrial applications. The XRS3 penetrates a minimum of 26mm steel with a basic X-ray image plate and more than 75mm steel with high sensitivity image plates. The XRS3 shares the same electronic controls and battery as the XR200 which enhances the versatility of both models. The XRS3 has proven it can withstand extreme environments including artic and desert conditions.
Key Features
- 270 KVP
- Penetrates minimum 1” Steel
- Weighs 5.3 kgs with battery
- Pulse setting from 1 to 999 counts
- Select 1 or 3 pulses per count in software
- Select time delay between pulse trains
- Records total life pulses
- 2 resettable pulse trackers
- DeWalt® 18V Battery pack
- One hour DeWalt® Battery Charger
XRS-4 Industrial X-ray source
The XRS-4 is a 370 kV, battery powered, pulsed X-ray generator used for special application security and industrial tasks. The XRS-4 has high penetrative capabilities suitable for inspecting munitions and dense shielding materials. The XRS-3 shares the same electronic controls and battery as the XR200 which enhances the versatility of both models. The XRS-4 has proven it can withstand extreme environments including arctic and desert conditions.
Key Features
- 370 KVP
- Weighs 8.3 kgs with battery
- Pulse setting from 1 to 999 counts
- Select 1 or 3 pulses per count in software
- Select time delay between pulse trains
- Records total life pulses
- 2 resettable pulse trackers
- DeWalt® 18V Battery pack
- One hour DeWalt® Battery Charger
Scansilc X-ray Imaging Panels are different from all the others. They have intelligent, sophisticated circuitry that carry out all the x-ray capture, processing and transfer without the bulky interface boxes that other x-ray systems require. They are rugged, water-resistant and drop-proof to 1m without any additional protection.
Connect by cable or wi-fi to a laptop or tablet, add a portable x-ray generator (pulsed or CP) and you have a complete system. Fast and easy to set up and use. Compact and lightweight. Helping operators complete their missions quickly, effectively and reliably.
Scansilc 1824
Scansilc 1824 is a portable X-ray system designed to meet the specific needs of fast-moving bomb techs and those involved in covert search bomb disposal and security tasks. This is the future of portable X-ray for tactical operations.
Key Features
- Compact with 17.5cm x 22.3cm imaging area
- Designed for rapid grab-and-go deployment
- A complete x-ray system weighs under 5kg
- Detector panel produces a market-leading (76 micron) high-definition x-ray image
- Detector panel is IP67 water and dust-proof
Scansilc 2430U
SCANSILC 2430U is a new robust and compact x-ray panel for security, defence and light industrial x-ray applications.
Key Features
- Compact with 23.3cm x 30cm imaging area
- Detector panel is designed for security and EOD operators
- Detector panel is Lightweight <2.8kg
- Detector panel produces a market-leading (76 micron) high-definition x-ray image
- Detector panel is IP67 water and dust-proof
- Wired or wireless capability (No interface box)
- Sets and Controls X-ray pulses from laptop / tablet
- AED mode
Scansilc 3643U
SCANSILC 3643U is a robust, large format x-ray panel for security and defence x-ray applications.
Key Features
- Large panel with 35.8cm x 43cm imaging area
- Weight of Detector panel is 4.5Kg
- Detector panel produces Super high-definition image quality of 100 microns
- Detector panel is IP67 water and dust-proof
- Wired or wireless capability (No interface box)
- Sets and Controls X-ray pulses from laptop / tablet
- AED mode
Scansilc 4357U
SCANSILC 4357U is a new, robust slim format x-ray panel for security and defence applications, large enough for screening cabin baggage size items and fire extinguishers in a single x-ray.
Key Features
- Large panel with 43cm x 57.3cm imaging area
- Weight of Detector panel is 4.5Kg
- Detector panel produces Super high-definition image quality of 140 microns
- Detector panel is IP67 water and dust-proof
- Wired or wireless capability (No interface box)
- Sets and Controls X-ray pulses from laptop / tablet
- AED mode
Scanwedge
Scanwedge Ultra is a new lightweight rugged man portable x-ray panel. Unlike other CCD x-ray imagers, Scanwedge Ultra can easily slide behind objects close to a wall and into narrow gaps less than 1” thick.
Key Features
- Compact with 20cm x 25cm imaging area
- Compact flat panel is designed for easy access in confined areas
- Detector panel is IP67 water and dust-proof
- Wired or wireless capability (No interface box)
- Sets and Controls X-ray pulses from laptop / tablet
- Scanwedge is designed to set up in less than 2 minutes and operate in under 5 minutes
- Real time X-ray system and does not require any expensive consumables or processing equipment
Scantrak
Scantrak is a multi-application portable digital X-ray system. It is used by a variety of users which include police, military, customs and public safety agencies as well as prison and building managers to search and examine items safely in situ.
Key Features
- 20cm x 25cm imaging area
- Wired or wireless capability (No interface box)
- Sets and Controls X-ray pulses from laptop / tablet
- Supplied in rugged wheeled pelicans with x-ray generator, laptop control and 50m cable on reel
If you need x-ray plates in a range of sizes that are thin and flexible enough to get into difficult areas or to attach or bend around a large object then CR X-ray plates are perfect for your job. CR plates are lightweight and flexible and provide true ground level imaging. They combine with any pulsed or CP x-ray generator to provide a very lightweight on-target x-ray screening solution with no wires or set up required.
The image plates are read using a CR processor to provide a high-quality image on a companion laptop or pc screen. The processor is portable enough to take to a scene or can be operated from a remote-control point or vehicle.
Scanx Scout
ScanX Scout is a high performance portable digital X-ray system combining high sensitivity flexible film plates, a rugged battery powered image plate reader and a laptop or detailed forensic level X-ray inspection across the full spectrum of security and defence applications.
Key Features
- Portable and easy to set up and use in less than 2 minutes
- Thin flexible X-ray image plates in a range of standard sizes from 18 x 24 cm up to 35 x 43 cm
- Long X-ray plates in sizes 35 x 90 cm and 35 x 130 cm
- Image Resolution from 300-50 microns and 3.8-5 lp/mm (dependent on x-ray source, x-ray software and type of image plate used)
- Scan and erase the reusable plates in a single pass
- Battery powered for mobile field operations
- Resolution: Vertical: 3.8 to 5.0 lp/mm.
- Resolution Horizontal: 3.8 to 7.0 lp/mm
CR35+
Scanna CR35+ is the latest generation digital X-ray system combining high sensitivity flexible film plates and a forensic standard X-ray image plate reader with inbuilt mini screen for fast image capture across a broad spectrum of defence and security applications. Unlike electronic DR imagers, CR image plates are totally flexible and do not require any cables or batteries.
The image plates are available in a range of sizes and can be used individually or mounted in multiple combinations to check larger objects. Unlike digital x-ray plates, digital film has no dead areas around the sides or at ground level enabling full ground level detection of objects to be achieved.
Key Features
- Portable and easy to set up and use in less than 2 minutes
- Thin Flexible Image plates in a range of sizes from 18 x 24 cm up to 43 x 35 cm
- Image Resolution from 100 – 50 microns and 10 line pairs minimum
- Scan and erase the reusable plates in a single pass
- Robust low maintenance plate scanner with no carousel or clips required during scanning
- Full ground level imaging capability
Flexible X-ray Image Plates
CR Digital X-ray Image Plates are used with the ScanX Scout and CR35 X-ray processors to take high-definition x-rays. Image plates are thin, flat, flexible and re-usable up to a thousand times. They are lightweight (only 100 grams), easy to deploy with no cables or connections required.
Key Features
- Flexible
- Lightweight
- Reusable Up To 1,000 Times